Stainless Steel Slit Coils
Slit from wide coils to your strip widths, 0.3 to 8 mm thick, for welded tube and roll-formed profiles. 304/304L, 316L/316Ti, 441 and 444, with the inner diameter and coil weight to suit your line.
Slit coils
Slit coils for tube and profile mills
Tell us what your line makes and the strip widths it runs. We suggest the grade and coil build that fit, and confirm them in our quotation.
What we supply
- Slit from wide coils to your strip widths
- 0.3 to 8 mm thick
- 304/304L, 316L/316Ti, 441 and 444
- Inner diameter and coil weight to suit your line
- EN 10204 3.1 certificates; certificate type and origin stated for each lot in our quotation
- Single coils or regular call-offs; minimum quantities stated in our quotation
For a price
What to send us
- Grade and finish
- Thickness and the strip widths you need, with the tolerances
- Inner diameter and the maximum outside diameter or coil weight of your line
- Quantity per delivery and per year, and the delivery place
Your own coils, slit to width
Send us the coil data (grade, thickness, width, weight and inner diameter) and the strip widths you need. Slitting, packing and transport are quoted as one job.
- 0.05 to 8 mm thickStrips from a few millimetres wide.
- Quoted as one jobSlitting, packing and transport together.
- From a single coilTo regular runs.
Grades for slit coils
Common grades for welded tube and roll-formed profiles. Other grades on request.
| Grade (EN / AISI) | Type | Typical uses |
|---|---|---|
| 1.4301 / 304 | Austenitic | Stampings, deep-drawn parts, clamps and bands |
| 1.4307 / 304L | Austenitic, low carbon | Welded parts and welded tube |
| 1.4404 / 316L | Austenitic with molybdenum | Heat exchangers, gaskets, food and marine parts |
| 1.4509 / 441 | Ferritic, niobium and titanium | Exhaust and heat-exchanger parts |
| 1.4521 / 444 | Ferritic with molybdenum | Water heaters and heat exchangers |
316Ti also on request. The certificate type and the origin are stated for each lot in our quotation.
From enquiry to delivery
Strip, slit coils and banding can go on one quotation, with the certificates your parts need.
Send your specification
Grade and finish, thickness and the strip widths with the tolerances, the coil build (inner diameter, outside diameter or coil weight), the quantity and the delivery place.
Receive our quotation
Price, availability and delivery date, with the certificate type and the origin stated for each lot. EN 10204 3.1 certificates; 3.2 inspection on request, agreed before we quote.
Order and delivery
We confirm your order in writing. Single coils or regular call-offs; minimum quantities depend on grade and size and are stated in the quotation.
Frequently asked questions
Which thicknesses and widths can you supply?
Slit coils from 0.3 to 8 mm thick, slit from wide coils to the strip widths you need. Send us the sizes and we confirm them in our quotation.
Can you slit our own coils?
Yes. Send us the coil data (grade, thickness, width, weight and inner diameter) and the strip widths you need. Slitting, packing and transport are quoted as one job.
Which grades do you supply as slit coils?
304/304L, 316L/316Ti, 441 and 444 for welded tube and roll-formed profiles. Other grades on request.
Which certificates come with the strip?
EN 10204 3.1 certificates with the chemical analysis and the mechanical properties of the agreed temper. Inspection certificates 3.2 on request, agreed before we quote. The certificate type and the origin are stated for each lot in our quotation.